Grandstream Networks GXV3662 series User Manual page 9

Connect Connect Connect Connect to to to to the the the the Camera Camera using Camera Camera
If the camera does not get response from DHCP server after 3 minutes, it can be accessed
by the default IP 192.168.1.168.
1. Connect your PC to the same network as the GXV3662.
2. Configure the IP address of your PC to: 192.168.1.XXX (1<XXX<255) and configure
the subnet mask to 255.255.255.0.
3. Make sure that the device is turned on and connected to the network.
4. Start Internet Explorer on your computer.
5. Enter 192.168.1.168 in the address bar of the browser.
6. Enter the administrator user name and password to access the Web Configuration
Interface
7. The default user name and password are both set to admin.
8. IE will indicate that "This website wants to install the following add-on:
'GSViewerX.cab' from 'Grandstream Networks Inc'." Install this add-on by following
the instructions in IE.
9. You will see the home page.
Firmware 1.0.4.8
Grandstream Networks, Inc. 11/08/10
using Static using using Static IP. Static Static IP. IP. IP.
GXV3662 IP dome camera Series
Page
of 22
8