Number Of Rings; Remote Access Code; Message Alert Tone - VTech CS6124 User Manual

Answering system settings

Number of rings

You can choose from two, four, or six rings; or toll saver. With toll saver
selected, the answering system answers after two rings when you have
new messages, and after four rings when you have no new messages. This
enables you to check for new messages and avoid paying unnecessary long
distance charges if you are calling from out of your local area.
1. Press MENU/
SELECT
2. Press CID or to select Answering Sys, then press
3. Press CID or to select Ans sys setup, then press
4. Press CID or to select
5. Press CID or to choose from 6, 4, 2 or Toll saver, then press
/SELECT
MENU
While the answering system is answering a call, you can press
on the telephone base, or press
screening. Press

Remote access code

A two-digit security code is required to access the answering system remotely
from any touch-tone telephone. The preset code is 19. You can set the code
from 00 to 99.
1. Press MENU/
SELECT
2. Press CID or to select Answering Sys, then press
3. Press CID or to select Ans sys setup, then press
4. Press CID or to select Remote code, then press
5. Press the dialing keys (0-9) to enter the code or
00 to 99, then press
MENU

Message alert tone

This telephone can beep every 10 seconds to alert you of new messages. The
tone stops when all new messages have been reviewed.
1. Press MENU/
SELECT
2. Press CID or to select Answering Sys, then press
3. Press CID or to select Ans sys setup, then press
4. Press CID or to select Msg alert tone, then press
5. Press CID or to choose On or Off, then press
• The answering system must be turned on for the message alert tone to function.
• Press any key on the telephone base (except /FIND HANDSET) to temporarily
silence the message alert tone.
when the handset is not in use.
#
of rings, then press
/PLAY/
STOP
/ /STOP to temporarily turn off the call screening.
PLAY
when the handset is not in use.
/SELECT
when the handset is not in use.
27
/SELECT.
MENU
/SELECT.
MENU
/SELECT.
MENU
/VOLUME once
to temporarily turn on the call
/SELECT.
MENU
/SELECT.
MENU
/SELECT.
MENU
CID or to select from
/SELECT.
MENU
/SELECT.
MENU
/SELECT.
MENU
/SELECT to
MENU