Wlan Logger Menu - ABB UNO-DM-TL-PLUS-US Product Manual

W
LAN Logger Menu
By selecting the WLAN Logger menu, the following submenus can be
accessed:
Settings
Selecting Settings brings up the first screen relating to the password.
The default password is "0000".
This can be changed by using the display buttons, following the same
procedure as always:
• ENTER scrolls through the digits (from left to right)
• ESC returns to the previous digit (from right to left)
• Press ESC several times to return to the previous menus
• DOWN scrolls down the numerical scale (from 9 to 0)
• UP scrolls up the numerical scale (from 0 to 9)
After entering the password, press ENTER to access the information in
this section:
1. Restore AP
This section of the menu allows you to restore the "Access Point" mode
of the wireless module of the inverter.
Info
By selecting the Info menu, the following menus can be accessed:
1. Part No.
Allows you to view the part number of the wireless board.
2. Serial number
Allows you to view the serial number, the week and year of manufacture
of the wireless board.
3. View IP.
Allows you to view the IP address assigned to the wireless board.
4. View Mode
Allows you to view the operating mode of the wireless board ("Access
Point" or "Host").
WLAN Logger
ENTER
Settings
DOWN
Info
Info
ENTER
Part No.
DOWN
Serial No.
DOWN
View IP
DOWN
View Mode
- 129 -
7 - Operation
1
UP
2
1
UP
2
UP
3
UP
4