Ntroduction And General Information; Warranty And Conditions Of Sale - ABB UNO-DM-TL-PLUS-US Product Manual

Introduction and general information
W
arranty and conditions of sale
ABB accepts no liability for failure to comply with the instructions for correct installation and is
not responsible for equipment it has not supplied.
Any modification, manipulation, or alteration of the hardware or software, voids the warranty.
The terms and conditions of sale, including requirements for maintaining
the warranty, are sent with each order. Refer to the terms and conditions
when designing the site, installling the inverter and setting up a
preventative maintenance program.
In particular, pay attention to physical clearances, any site noise limitations,
maximum system input voltage, potential flammability hazards.
ABB is not liable for for defects or malfunctions arising from improper
use of the equipment, failures or problems due to shipping damage or
out-of-spec environmental conditions; lack of or incorrect preventative
maintenance, tampering or repairs; use or installation by unqualified
persons.
- 4 -
1