Configuring Your Phone - Yealink SIP VP-T49G Quick Start Manual

Ultra-elegant gigabit
Hide thumbs Also See for SIP VP-T49G:
Table of Contents

Advertisement

Available languages

Available languages

Startup
After the IP phone is connected to the network and supplied
with power, it automatically begins the initialization process.
After startup, the phone is ready for use. You can con gure
the phone via web user interface or phone user interface.
Configuring Your Phone
Configuring via web user interface
Accessing the web user interface:
1. Tap
-> Status when the phone is idle to obtain the IP address of the phone.
2. Open a web browser on your computer, enter the IP address into the address bar (e.g., "http://192.168.0.10" or
"192.168.0.10"), and then press Enter.
3. Enter the user name (default: admin) and password (default: admin) in the login page and click Confirm.
Network Settings: Click on Network-> Basic-> IPv4 Config
You can con gure the network settings in the following ways:
DHCP: By default, the phone attempts to contact a DHCP server in your network to obtain its valid network settings, e.g.,
IP address, subnet mask, gateway address and DNS address.
Static IP Address: If the phone cannot contact a DHCP server for any reason, you need to con gure IP address, subnet
mask, gateway address, primary DNS address and secondary DNS address for the phone manually.
PPPoE: If you are using an xDSL modem, you can connect your phone to the Internet via PPPoE mode. Contact the ITSP
for the user name and password.
The IP phone also supports IPv6, but IPv6 is disabled by default.
Note:
Account Settings: Click on Account-> Register-> Account X (X=1,2,3...15,16)
Parameters of the account:
Register Status:
Line Active:
Label:
Display Name:
Register Name:
User Name:
Password:
Server Host:
It shows the register status of the current account.
You can select Enabled/Disabled to enable/disable the account.
It is shown on the touch screen to identify the account.
It is shown as Caller ID when placing a call.
It is an authenticated ID for authentication provided by ITSP (required).
It is provided by ITSP for registration (required).
It is provided by ITSP for registration (required).
It is provided by ITSP for registration (required).
Welcome
nitializing... Please wait
I
E
N
G
L
I
S
H
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents