Yealink SIP VP-T49G Quick Start Manual page 12

E
N
Answering a Video/Voice Call
G
Using the handset:
L
Pick up the handset.
I
Using the speakerphone:
S
Press .
H
Using the headset:
Press .
Controlling Video During a Call
To change the video view:
Tap or .
To turn on/off video during a call:
 Swipe down from the top of the screen to enter the control center, tap Video to turn on/o the video.
 Press .
 Adjust the shutter switch.
Ending a Video/Voice Call
Using the handset:
Hang up the handset or tap the EndCall soft key.
Using the speakerphone:
Press or tap the EndCall soft key.
Using the headset:
Tap the EndCall soft key.
Redial
 Press to enter the Placed Calls list, and then tap the desired entry.
 Press ttwice when the phone is idle to dial out the last dialed number.
Call Mute and Un-mute
 Press to mute the microphone during a call.
 Press again to un-mute the call.
Call Hold and Resume
To place a call on hold:
Press or tap the Hold soft key during an active call.
To resume the call, do one of the following:
 If there is only one call on hold, press
 If there is more than one call on hold, tap the call you want to resume, and press
8
or tap the Resume soft key.
or tap the Resume soft key.