Patient Positioning Warnings - GE Optima XR220amx Operator's Manual

X-ray system
Hide thumbs Also See for Optima XR220amx:
Table of Contents

Advertisement

DRAFT
WARNING
Perform periodic maintenance to ensure continued safe use of the equipment. Fol-
low recommended preventative maintenance schedule as outlined in the docu-
mentation provided with your system.
CAUTION
Make sure any other accessories or materials are not located in the primary X-ray
beam during exposure that could result in bad image quality.
CAUTION
Always use GEHC recommended accessories to ensure best performance and to
avoid possible hazards.
WARNING
Do not load non-system software onto the system computer.
WARNING
For accessories used in combination with diagnostic X-ray equipment, be aware of
the possible adverse effect arising from materials located in the X-ray beam.
Maximum Attenuation Equivalent mm AL or Percent
Collimator without spectral filters at 70kV
Permanent tube assembly filtration at 75 kV
Tube housing minimum filtration at 150 kV
Detector Housing at 100 kV
Standard Grid: 6:1 grid ratio horizontal
Optional Grid: 8:1 grid ratio horizontal

Patient Positioning Warnings

CAUTION
To avoid patient injury, always assist the patient as needed at the beginning or
end of an exam.
Optima XR220amx X-Ray System
Operator Manual
CTRL+SHIFT+F to search using Search Index (faster)
Item
54400222-1EN
© 2010 General Electric Company. All rights reserved.
Chapter 2: Safety and Regulatory
mm Al or Percent
TBD
0.9mm
TBD
TBD
35%
35%
Rev 1 DRAFT 11092010
REVIEW COPY
2-10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents