One Touch Copy - Vhs To Dvd - GoVideo RV4000 User Manual

DWL71D1D_RV4000(GB) 04.6.1 1:46 AM 페이지48

One Touch Copy - VHS to DVD

You can copy the contents of a VHS tape to a DVD+R or DVD+RW using the [VCR ➝ DVD] button. This allows
you to archive your old VHS tapes to DVD.
If the VHS videotape you are attempting to copy is copy-protected, you will not be able to copy the tape. It is not
permitted to copy Macrovision encoded tapes.
1
Insert a VHS Tape.
Insert the VHS videotape you wish to copy into the VCR deck.
2
Insert a DVD+R or DVD+RW disc.
Insert a blank DVD+R or DVD+RW disc in the DVD deck and close the disc tray.
When using a DVD+RW disc, you must initialize before copying; see
page 52.
3
Select VCR mode by pressing [VCR] on the remote control or
pressing [DVD/VCR] on the front panel.
4
Find the place on the VHS tape from which you want to start
recording using the [PLAY], [FF], [REW] and [PAUSE] functions.
For best results, pause playback at the point from which you
want to record.
5
Press [VCR ➝ DVD] on the front panel.
The Copy to DVD menu appears.
6
Press [REC SPEED] to select the desired Record Mode:
• HQ (High Quality, 1 hr/disc)
• SP (Standard Quality, 2 hrs/disc)
• EP (Extended Play, 4 hrs/disc)
• SLP (Very Low Quality, 6 hrs/disc)
7
Press [ENTER] to start copying.
8
Stop the Copy Process
To stop copying at any other time, press [STOP].
Copying will stop automatically when the VHS tape ends.
48
Basic Recording
Copy to Disc
Choose quality then
press COPY:
HQ
SP
EP
SLP
DVD Status
I Stop
0 : 00 : 10
DVD COPY
00:00:32
TAPE COPY
Copy to Disc
Stopping the copy & updating
the disc. This may take a few
minutes. Please wait...
Instructions
Setup-Exit
00:00:32 02:03:27
02:03:27