On-Screen Display Overview - GoVideo RV4000 User Manual

DWL71D1D_RV4000(GB) 04.6.1 1:46 AM 페이지35

On-Screen Display Overview

On-Screen Display Overview
The On-Screen Display provides feedback on the status of the DVD Recorder+VCR and/or the currently loaded
disc or tape. To access the On-Screen Display (or OSD), press the [DISPLAY] button.
Displaying Disc Information
To display information about the currently loaded disc or tape:
On-screen display operation
1
Press [DISPLAY] repeatedly to display/change the information displayed on-screen.
2
To remove the on-screen display, press [DISPLAY] repeatedly until it disappears.
See the descriptions from current page to the next page for detailed explanations of on-screen displays for
each media type.
Some discs may not provide all the features shown in the on-screen display examples.
Temporary Feedback Icons
Action prohibited or not available
Displaying TV Information
While watching TV, press [DISPLAY] to display/remove the on-screen display.
When there is no rewritable DVD disc inserted, you would see a screen like the following:
When a DVD+R or DVD+RW disc is inserted, the disc information is displayed at the first key input. If you press
again then the TV information is displayed.
channel number
Changing TV Channels
If no disc is playing, you can change TV channels using the [0-9] or [CH +/-] buttons on the remote control or [CH
.../†] buttons on the front panel.
Antenna channels are numbered 2 through 69. Cable channels are numbered 1 through 125.
current date and time
audio output signal
35