One Touch Record (Otr); Checking The Recording Time; To Pause The Recording - GoVideo RV4000 User Manual

DWL71D1D_RV4000(GB) 04.6.1 1:46 AM 페이지46

One Touch Record (OTR)

One Touch Recording allows you add recording time in fixed increments at the touch of a button.
1
Follow steps 1-4 under Recording from TV.
2
Press [REC (G)] repeatedly to set the length of the recording.
Recording starts after the first press. Each subsequent press increases the recording time by 15 minutes
(DVD, to a maximum of 240 minutes) within the available space or 30 minutes (VCR, to a maximum of 540
minutes). The recording time is displayed on the front panel display.

Checking the Recording Time

Total time and recorded time are displayed on the TV screen after pressing [DISPLAY] key twice. And recorded
time is displayed on the front panel display.

To Pause the Recording

1
Press [PLAY/PAUSE] to pause the disc during recording.
2
When you want to continue recording, press [PLAY/PAUSE] or [REC (G)].
Note
• To quit the One Touch Recording, press [STOP] for 3 seconds.
• The DVD Recorder+VCR will automatically power off when the One Touch Recording ends.
Tip (VCR mode only)
Always use [PLAY/PAUSE] for best results when making changes during recording .
For example: To change channels during recording, first press [PLAY/PAUSE] to put the unit in Pause mode. Then select
the desired channel on the DVD Recorder+VCR, and press [PLAY/PAUSE] again to resume recording.
• VCR and DVD cannot be recorded at the same time.
• While VCR is under recording, DVD playback is possible. But while DVD is under recording, all the VCR function is
deactivated.
46
Basic Recording