Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of...
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL AND MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard.
Before Use Playable Discs (8 cm/12 cm disc) Audio CD (8 cm/12 cm disc) In addition, this unit can play CD-Rs or CD-RWs that contain audio titles, MP3 or JPEG files. otes – Depending on the conditions of the recording equipment or the CD-R/RW disc itself, some CD-R/RW discs cannot be played on the unit.
Before Use (Continued) Precautions Handling the unit When shipping the unit The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packaged at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be distorted during playback.
Front Panel Controls DVD indicator Indicates the active deck. DVD EJECT ( Z Z ) Opens or closes the disc tray to load or unload discs. Remote Sensor Point the remote control here. Disc Tray (DVD deck) Insert a disc here. POWER indicator Indicates the standby mode.
Front Panel Display Lights when the DVD deck is selected. Lights when a disc is loaded in the DVD deck, and flashes when no disc is loaded. Indicates the total playing time, elapsed time, remaining time or current deck status (Playback, Pause, etc). Indicates Repeat mode is active.
Remote Control DVD, VCR & TV select buttons Sets the remote control to operate either the DVD deck, the VCR deck or TV. POWER Turns the DVD+VCR ON and OFF. DISPLAY Accesses the on-screen display. Switches among the clock, tape counter and tape remaining modes on the display.
Connections Panel DVD/VCR OUT (VIDEO/AUDIO (Left/Right)) Connects to a TV with video and audio inputs. VCR IN LINE 1 (VIDEO IN/AUDIO IN (Left/Right)) Connects to the audio/video output of an external source (audio system, TV/monitor, another VCR). S-VIDEO OUT (DVD OUT) Connects to an S-Video Input on your TV.
Connections For instructions on the various ways to connect the DVD+VCR to your TV and other equipment, please refer to pages 11-14. Please refer to the manuals of your TV, VCR, stereo system or other devices as necessary to make the best connec- tions.
Connections (Continued) Basic TV Connections Make one of the following connections, depending on the capabilities of your existing equipment. RF coaxial connection Connect the RF.OUT jack on the DVD+VCR to the antenna in jack on your TV using the supplied 75-ohm coaxial cable (R).
Connections (Continued) Optional, Preferred TV Connections otes The connections described below are for DVD play- back ONLY. S-Video connection Connect the S-VIDEO OUT jack on the DVD+VCR to the S-Video in jack on your TV using the optional S-Video cable (S). Connect the Left and Right AUDIO OUT jacks of the DVD+VCR to the audio left/right in jacks on your TV using the supplied audio cables (A2).
Connections (Continued) Optional, Preferred TV Connections You can ONLY listen to DVD playback using the COAX- IAL (X), OPTICAL (O) and AUDIO OUT (A2) connec- tions. The tuner and VCR will still be heard through the RF.OUT (R) or DVD/VCR AUDIO OUT (A1) jack. (See page 12.) Connecting to an Amplifier Equipped with 2- Channel Analog Stereo or Dolby Surround...
VCR Operation Setup On-Screen Display (OSD) The OSD provides feedback during VCR operation. ❶ ❷ ❸ ❹ PLAY HI-FI CH 4 STEREO JUL 5 , SAT 2:15 PM ❻ ❼ ❶ TAPE SPEED DISPLAY Shows the current tape speed. ❷ FUNCTION DISPLAY Indicates the function in progress.
VCR Operation Setup (Continued) VCR Setup Menu Options Press MENU to display the MAIN menu. Use v v /V V to select the SETUP menu, then press ENTER. The SETUP menu will appear. Use v v /V V to choose the desired option on the SETUP menu, then use b b /B B to choose the desired setting.
VCR Operation Setup (Continued) Setting the Clock The DVD+VCR gives you two ways to set the time and date: 1) Auto Clock Set, or 2) Manual Clock Set. The Auto Clock Set feature enables the DVD+VCR to set the clock while the DVD+VCR is turned off. Things to know before starting The clock uses the 12-hour system.
DVD Operation Setup General Explanation This manual provides general instructions for operating the DVD+VCR. Some DVDs have special requirements or allow only limited operations during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the DVD+VCR or is not available on the disc.
DVD Operation Setup (Continued) Initial Settings You can set your personal preferences for DVD+VCR operation. General Operation Press SETUP. The setup menu appears. Disc Audio Original Disc Subtitle English Disc Menu French Rating German Country Code Spanish TV Aspect Italian Chinese Menu Language Progressive Scan...
DVD Operation Setup (Continued) Sound Digital Audio Output Each DVD disc has a variety of audio output options. Set the DVD+VCR’s Digital Audio Output according to the type of audio system you use. DOLBY DIGITAL/PCM: Select DOLBY DIGITAL/PCM if you have connected the DVD+VCR’s DIGITAL AUDIO OUT jack to a Dolby Digital decoder (or an amplifier or other equipment with a Dolby Digital decoder).
DVD Operation Setup (Continued) Parental Control Rating Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain scenes on the disc. These scenes are rated from 1 to 8, and alternatively, more suitable scenes are available for selection on some discs.
VCR Operation Normal Playback Preparation: Turn on the TV. Tune the TV to the DVD+VCR output channel (CH 3 or 4) or set the TV’s source selector to VIDEO. If a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV, set the TV’s source selector to VIDEO. Set the DVD+VCR source to VCR as shown in “Selecting the Viewing Source”...
VCR Operation (Continued) Normal Recording Preparation: Turn on the power on both the DVD+VCR and TV. Tune the TV to the DVD+VCR output channel (CH 3 or 4) or set the TV’s source selector to VIDEO. If a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV, set the TV’s source selector to VIDEO.
VCR Operation (Continued) Use V V to choose the SPEED option. 1 1 0 0 Use b b /B B to choose the desired recording speed (AUTO, SP or SLP). AUTO mode determines how much tape is left and automatically switches from SP to SLP, if necessary, to complete recording of the program.
VCR Operation (Continued) Instant Timer Recording Instant Timer Recording allows you to easily make a recording of a preset length without using the program- mable timer. Preparation: Turn on the power on both the DVD+VCR and the TV. Be sure the TV is tuned to the DVD+VCR output channel (3 or 4). If a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV, set the TV’s source selector to VIDEO.
VCR Operation (Continued) VHS Hi-Fi Stereo System/ MTS Broadcast The DVD+VCR is equipped with a VHS Hi-Fi audio sound system for recording and playback. The informa- tion below gives a brief description of Hi-Fi audio and how to record and play tapes in Hi-Fi audio mode. Playback with Hi-Fi Stereo Audio Sound A stereo TV with AUDIO/VIDEO input jacks or a stereo audio system is required for true stereo playback.
VCR Operation (Continued) Tape Counter Memory Feature Real-Time Counter The tape counter shows length of tape in hours, min- utes, and seconds. Press CLK/CTR to select the real- time counter display. Every press of CLK/CTR changes the TV screen as shown below.
DVD Operation Playing DVDs Playback Setup Turn on the TV and select the video input source con- nected to the DVD+VCR. Audio system: Turn on the audio system and select the input source connected to the DVD+VCR. Set the DVD+VCR output source to DVD as shown in “Selecting the Viewing Source”...
DVD Operation (Continued) General Features (Continued) Still Picture and Frame-by-Frame Playback 1 Press PAUSE/STEP (X) during playback. The DVD+VCR will go into Pause mode. 2 With a DVD, you can advance the picture frame by frame by pressing PAUSE/STEP (X) repeatedly on the remote control.
DVD Operation (Continued) General Features (Continued) Marker Search MARKER SEARCH You can start playback from a bookmarked point on your disc. Up to nine points can be memorized. To enter a mark, follow these steps. 1 During disc playback, press MARK when playback reaches the point you want to bookmark.
Operation with Audio CD and MP3 Disc Playing an Audio CD and MP3 Disc The DVD Player can play MP3 formatted recordings on CD-ROM, CD-R or CD-RW discs. Before playing MP3 recordings, read the notes on MP3 Recordings on right. Insert a disc and close the tray.
Operation with Audio CD and MP3 Disc (Continued) Pause 1 Press PAUSE/STEP ( \[ ) during playback. 2 To return to playback, press PLAY N or press PAUSE/STEP ( \[ ) again. Moving to another Track Press REW (.) or FF(>) briefly during playback to go to the next track or to return to the beginning of the current track.
Operation with JPEG Disc Viewing a JPEG disc JPEG This DVD Player can play discs with JPEG files and Kodak picture CD. Before playing JPEG recordings, read the notes on JPEG Recordings on right. Insert a disc and close the tray. The MP3/JPEG choice menu appears on the TV screen.
Programmed Playback Programmed Playback with Audio CD and MP3 Disc The Program function enables you to store your favorite tracks from any disc in the player memory. Program can contain 30 tracks. Press PROG.PLAY during playback or in the stop mode to enter the Program Edit mode. mark will appear to the right of the word Program on the right side of the menu screen.
Controlling the TV with remote control Your remote control operates the common features of most, but not all, models and brands of IR (infrared) controlled TVs. In the chart, find the code corresponding to your brand of operational TV. While holding down the TV button, enter the 2-digit code number using the number buttons (0 - 9).
Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Symptom The power cord is disconnected. No power. The power is on, but No disc is inserted. No tape is inserted. the DVD+VCR does not work.
Troubleshooting (Continued) Cause Symptom Some channels are The skipped channels were deleted with skipped over when the CH. ADD/DEL option. using CH (3/4) Picture and sound of Antenna or cables are loose. broadcasting channel are weak or missing. Wrong TUNING BAND option is being used.
Language Code List Enter the appropriate code number for the “Disc Audio”, “Disc Subtitle” and/or “Disc Menu” settings (see page 19). Language Code Language Abkhazian 6566 Fiji Afar 6565 Finnish Afrikaans 6570 French Albanian 8381 Frisian Amharic 6577 Galician Arabic 6582 Georgian Armenian...
Country Code List Enter the appropriate code number for the “Country Code” setting (see page 21). Code Country Code Country Andorra Eritrea United Arab Emirates Spain Afghanistan Ethiopia Antigua and Barbuda Finland Anguilla Fiji Albania Falkland Islands Armenia Micronesia Netherlands Antilles Faroe Islands Angola France...
Specifications General Power requirements Power consumption Dimensions (approx.) Weight (approx.) Operating temperature Operating humidity Signal system Inputs ANTENNA IN VHS VIDEO IN(LINE1, 2) VHS AUDIO IN(LINE1, 2) Outputs VIDEO OUT S-VIDEO OUT COMPONENT VIDEO OUT (PROGRESSIVE SCAN) Audio output (digital audio) Audio output (optical audio) Audio output (analog audio) RF OUT...
This warranty covers internal operating parts and service/labor to repair or replace covered parts in this GoVideo product for 90 days labor, 1 year parts, from the date of purchase, defined as follows: (1) Original Consumer Retail Purchase; (2) First Rental Purchase Agreement; or (3) First Lease Purchase Agreement (the “Warranty Period”).
Need help?
Do you have a question about the DV1130Q and is the answer not in the manual?
Questions and answers