Connection Details - Singtel Ras - Planex BLW-54MR User Manual

Connection Status
Connection Log
Connection Log
Buttons
Connect
Disconnect
Clear Log
Refresh

Connection Details - SingTel RAS

If using the SingTel RAS access method, a screen like the following example will be displayed
when the "Connection Details" button is clicked.
This indicates whether or not the connection is currently estab-
lished.
"
If the connection does not exist, the "Connect" button can be
used to establish a connection.
" If the connection currently exists, the "Disconnect" button can
be used to break the connection.
" Normally, it is not necessary to use the Connect and Disconnect
buttons unless the setting "Connect automatically, as required"
is disabled.
"
The Connection Log shows status messages relating to the
existing connection.
"
The Clear Log button will restart the Log, while the Refresh
button will update the messages shown on screen.
If not connected, establish a connection to Telstra Big Pond.
If connected to Telstra Big Pond, terminate the connection.
Delete all data currently in the Log. This will make it easier to read
new messages.
Update the data on screen.
Figure 31: Connection Details - RAS
Operation and Status
45