Wireless Router User Guide
Connection Log
"
Connection Log
"
Buttons
Connect
If not connected, establish a connection to your ISP.
Disconnect
If connected to your ISP, hang up the connection.
Delete all data currently in the Log. This will make it easier to read
Clear Log
new messages.
Refresh
Update the data on screen.
Connection Status - Telstra Big Pond
An example screen is shown below.
Data - Big Pond Screen
Connection
Physical Address
IP Address
The Connection Log shows status messages relating to the
existing connection.
The "Clear Log" button will restart the Log, while the Refresh
button will update the messages shown on screen.
Figure 30: Telstra Big Pond Status Screen
The hardware address of this device, as seen by remote devices.
(This is different to the hardware address seen by devices on the
local LAN.)
The IP Address of this device, as seen by Internet users. This
address is allocated by your ISP (Internet Service Provider).
44