Disconnect
If connected to your ISP, hang up the connection.
Clear Log
Delete all data currently in the Log. This will make it easier to read
new messages.
Refresh
Update the data on screen.
Connection Status - L2TP
If using L2TP, a screen like the following example will be displayed when the "Connection
Details" button is clicked.
Data - L2TP Screen
Connection
The hardware address of this device, as seen by remote devices on the
Physical Address
Internet. (This is different to the hardware address seen by devices on
the local LAN.)
The IP Address of this device, as seen by Internet users. This address
IP Address
is allocated by your ISP (Internet Service Provider).
This indicates whether or not the connection is currently established.
Connection Status
"
"
Figure 29: L2TP Status Screen
If the connection does not exist, the "Connect" button can be
used to establish a connection.
If the connection currently exists, the "Disconnect" button can be
used to break the connection.
Operation and Status
43