Physical Details - Planex BLW-54MR User Manual

Wireless Router User Guide

Physical Details

Front-mounted LEDs
Power LED On - Power on.
Off - No power.
Status (Red) On - Error condition.
LED
Off - Normal operation.
Blinking - This LED blinks during start up, and during a Firmware Up-
grade.
LAN LEDs For each port, there are 2 LEDs
"
Link/Act
"
"
"
"
100
"
"
WAN LED On - Connection to the Broadband Modem attached to the WAN (Internet)
port is established.
Off - No connection to the Broadband Modem.
Flashing - Data is being transmitted or received via the WAN port.
Wireless LED On - Wireless connection available; Wireless Access Point is ready for
use.
Off - No Wireless connection available.
Flashing - Data is being transmitted or received via the Wireless access
point. Data includes "network traffic" as well as user data.
Figure 2: Front Panel
On - Corresponding LAN (hub) port is active.
Off - No active connection on the corresponding LAN (hub) port.
Flashing - Data is being transmitted or received via the corre-
sponding LAN (hub) port.
On - Corresponding LAN (hub) port is using 100BaseT.
Off - Corresponding LAN (hub) port connection is using
10BaseT, or no active connection.
4