Maintenance; Replacement Parts; Factory Service - Standard Horizon HX407 Owner's Manual

8. MAINTENANCE

8.1 GENERAL
The inherent quality of the solid-state components in STANDARD HORIZON
radios will provide many years of continuous use. Take the following precau-
tions to prevent damage to the radio.
To prevent corrosion of electrical contacts and keep the water resis-

tance, keep the microphone or the jack connected at all times.
Never press the PTT switch unless an antenna or suitable dummy load

is connected to the antenna receptacle.
Ensure that the input voltage does not exceed the value specified in your

Owner's Manual.
Use only STANDARD HORIZON-approved accessories and replace-

ment parts.

8.2 REPLACEMENT PARTS

Occasionally an owner needs a replacement part. Items can be ordered from
our Parts Department by writing or calling (in USA or Canada), or Standard
Horizon/Yaesu authorized dealers (outside USA or Canada).
Marine Division of YAESU U.S.A.
6125 Phyllis Drive, Cypress, CA 90630, U.S.A.
Telephone (800) 767-2450
8.3

FACTORY SERVICE

In the unlikely event that the radio fails to perform or needs servicing, please
contact the following:
For repairs In USA
Standard Horizon
Attention Marine Repair Department
6125 Phyllis Drive, Cypress, CA 90630
Telephone (800) 366-4566
For repairs In Canada
Westcom Marine
488 East 62 nd Avenue
Vancouver BC V5X2G1
Telephone (604) 327-6280
Page 20
Application for FCC / IC
FCC ID: K6630394X20
IC: 511B-30394X20
HX407