GREEN SERIES FITNESS CIR-TM6000AC-G Owner's Manual

GREEN SERIES FITNESS CIR-TM6000AC-G Owner's Manual

Light commercial treadmill
Hide thumbs Also See for CIR-TM6000AC-G:

Advertisement

Owner's Manual
CIR-TM6000AC-G
Light Commercial Treadmill
Light Commercial
Install Date: _________________________ Serial Number: ________________________
www.GreenSeriesFitness.com
©February 2016
Call Toll free at (800) 269-7130
CIR-TM6000AC-G
Revision 1.3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CIR-TM6000AC-G and is the answer not in the manual?

Questions and answers

Summary of Contents for GREEN SERIES FITNESS CIR-TM6000AC-G

  • Page 1 Owner's Manual CIR-TM6000AC-G Light Commercial Treadmill Light Commercial Install Date: _________________________ Serial Number: ________________________ www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 2: Table Of Contents

    Control panel function and programs OPERATION ………………………………………………………………………..…… 28-30 BELT ADJUSTMENT ………………………………………………………….…..…… 31-32 CARE & MAINTENANCE …………………………………………………….…...…... 33-37 TROUBLE SHOOTING …………………………………………………………..……..…. 38 ENGINEERING MODE ……………………………………………………….….…….. 39-40 WARRANTY …..…………………………………………………………………..…….. 41-43 www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 3: Safety Precautions

    These spacing recommendations should be used when positioning equipment away from sources of heat, such as radiators, heat registers, and stoves. Avoid temperature extremes. 12” 300mm 24” 24” 24” 600mm 600mm 600mm 79” 2000mm www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 4: Electrical Power Requirements

    • be approved and supplied by Green Series Fitness prior to use. Don't attempt to use this unit with an extension cord which does not meet Green Series Fitness criteria of the • following; 12 gauge SO3, maximum of 25 foot length with a 20 amp rating.
  • Page 5: Important Safety Instructions

    13. The equipment is intended for commercial use. Store the safety key in a secured location while not in use and keep away from children. Maximum user weight: 450Ibs (204 kg). www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 6: Emergency Dismount

    Sustained exercise conditions your heart, lungs and muscles. The longer you are able to sustain exercise within your target heart range, the greater the aerobic benefits. To begin maintain 2~3 minutes of steady, rhythmic exercise, then check your heart rate. www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 7 These side platforms are an appropriate position to relax before starting the training again. For your own safety and comfort, always start your training sessions at low speed. www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 8: Emergency Stop Switch

    In case of emergency, press the STOP key, hold the handrails and get off when the belt stops. www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 9: Target Heart Rate Zone

    *The noise value list below is when it is at top speed with unloading status : LpAeq(dB) < 70dB www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 10: Technical Specifications

    Program: 40 programs, 1 target, 3 Heart Rate Control, 1 fitness test and 2 custom. Standard features: Total used time, distance, heart rate, calories, speed, incline, hand pulse, fan, quick speed / incline button, Wireless HR receiver, Audio in jack. www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 11: Unpacking & Assembly

    8mm curve washer 8mm Flat washer (4 each) (20 each) (16 each) 5mm x 76mm 5mm x 114mm 6mm T-Handle Belt Lube #3-9 #3-8 3mm x 12mm Screw www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 12 Removal of motor cover Remove the motor cover screws #1 - #4, and put the motor cover aside. 2). Reinstall motor cover screws #1 - #4 to frame until Step 5. www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 13 2). Pull wire up to top of tube with black pull string. 3). Do not untie wires till end of Step 3 Pull wire through top www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 14 #8. Finger tight bolts at this time. Attention: Do not tighten all bolts until end of Step 8mm x 15mm Allen Bolt (8 each) 8mm Flat Washer (8 each) www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 15 8mm x 15mm Allen Bolt (4 each) 8mm Flat Washer (4 each) Attention: Confirm both plastic are aligned and flushed with no gap before moving on to Step 4. www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 16 Step 2. 8mm x 15mm (8 each) Upper console wire 8mm Flat Washer Lower console wire (4 each) *Inside Only 8mm Curve Washer (4 each) *Front & Back Only www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 17 Angle hood at 45 degrees left to right to slide hood between front mass tubes, then down to position over motor housing. Install all four (4) screws finger tight, then once all in, tighten with Phillips screw driver. www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 18 3) Fasten power cord and “sure connect” by Philips screw driver with new 3mm x 12mm screw. #3-8 Power Cord Power Cord Sure Connect 3mm x 12mm Phillips head screw Close-up view of Power Cord w/ Sure Connect www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 19: Warm Up & Cool Down

    Keep your right leg straight and the left foot on the floor; try to stretch your right hand toward the toe, hold this posture for 15 seconds. Relax, and then repeat the action for left leg. www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 20: Panel Control & Program

    PANEL CONTROL Safety Key Pad The treadmill will not function if the safety key is not present. www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 21 To reset and back to idle mode while setting, pause or stop condition. Program select To select program. Quick start or program start. Quick Start / Pause Press for start the treadmill while in the pause, stop or idle condition. www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 22 』 * If time setting is not zero (count down mode), the time of each segment is “time/16”, else every 2 minute will change the program profile segment. www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 23 * If time setting is not zero (count down mode), the time of each segment is “time/16”, else every 2 minute will change the program profile segment. www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 24 You can use any speed or incline key or device to change present speed or incline. 7.4. It will process the cool down program before end of workout if time counts down to 0. www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 25 PROGRAMS Course program profile www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 26 8. The segment will not be executed if the setting time is “o”. 9. You can also adjust the speed and incline during the workout. 10. It will process the cool down program after 16 segments have been executed. www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 27 6.3. Test result : 【 V ERY GOOD 】 【 G OOD 】 【 A VERAGE 】 【 B AD 】 【 V ERY BAD 】 www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 28 11. You can use any speed or incline key or device to change the speed or incline. 12. It will process the cool down program if time count down to 0. www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 29: Operation

    4. The treadmill is now ready to be used. Ensure the emergency stop key clip is secured to your clothing at all times during use. 5. After use, clip the emergency stop key around handrail one and clip to its own cord. www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 30 High speaker volume may interfere with the heart rate accuracy. Please decrease the speaker volume when you are using the heart rate function. *Warning: After removing the safety key, wait for 5 seconds to re-insert in. www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 31 If the heart beat is too high or irregular, please have your hands out of the hand grip until the pulse display returns to " 0 ", then redoing the test. Don't do this test while running. www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 32: Belt Adjustment

    Using wrench, turn the right adjustment bolt clockwise 1/4 turn and the left adjustment bolt counterclockwise 1/4. c. If the belt is still not centered, repeat the above steps until the running belt is on center. www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 33: Belt Adjustment

    The running belt should be centered and adjusted within the area which has been indicated by the arrows on right roller cover and left roller cover. The running belt can be worn and damaged if the running belt travels beyond this scope. www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 34: Care & Maintenance

    It can cause the running belt to slip when in use if there is too much lubrication. SPRAY AREA Silicone bottle www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 35 Front Roller & Groove Wipe Checking Rear Roller Checking Safety Key Wipe Drive Belt Wipe Checking Running belt tension Checking Motor Control Clean(dust) Motor Pulley & Groove Checking www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 36: Recommended Cleaning Tips

    Support recommends that the following preventive maintenance schedule be followed. DAILY • Unplug the treadmill. Clean entire machine using water and a mild soap or other Green Series Fitness approved solution (cleaning agents should be alcohol and ammonia free). MONTHLY or QUARTERLY (depending on usage or dirty environments) •...
  • Page 37 This treadmill has been designed and equipped with wheels for easy mobility. Before moving, ensure the master power switch is in the off position and the power cord is unplugged from the electrical outlet. www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 38: Check For Damaged Parts

    Maintain the belt and deck by wiping the sides of the belt and deck with a clean cloth. The user can also wipe under the belt 2 inches (~51mm) on both sides removing any dust or debris. The deck can be flipped and reinstalled or replaced by an authorized service technician. Please contact Green Series Fitness for more information. www.GreenSeriesFitness.com ©February 2016...
  • Page 39: Trouble Shooting

    If the supply cord is damaged, it must be replaced by the manufacturer or its service provider or a similarly qualified person in order to avoid a hazard. www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 40: Engineering Mode

    Q-START AGE, dot-matrix window shows age value, press Speed Fast or Speed Slow to set the age, range: 13~80. Press Enter to confirm and back to idle mode. www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 41 XX=set duty value. Press Speed Fast or Speed Slow to set the duty. Press Start and wait for a beep sound to save. Press Enter to confirm and go back to the idle mode. (default=40, set range=35~80) www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 42: Warranty

    (iii) service or alteration by anyone other than an authorized GREEN SERIES™ representative; (iv) damages incurred through irresponsible use, including those resulting from equipment placed into www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 43 Returns will not be accepted without an RMA. Manufacturer restrictions do apply. Any item missing the UPC on the original packaging may not be returned. www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...
  • Page 44: Warranty

    By using this product, I indicate that I understand and agree to the terms of this warranty. www.GreenSeriesFitness.com ©February 2016 Call Toll free at (800) 269-7130 CIR-TM6000AC-G Revision 1.3...

Table of Contents