Disassembly And Assembly For Repair - HYT TM-610 Service Manual

TM-610 Service Manual

Disassembly and Assembly for Repair

Disassembly

1. Power off the radio. Disconnect the power cord and screw out the antenna connector.
2. Remove the top cover.
3．Loosen the 8 screws locking the shielding and pedestal of the aluminum chassis. Then remove the
shielding and disconnect FFC and speaker cable which bind front panel PCB and main unit PCB.
4. Loosen the two screws shown in the following figure, and detach the front panel from the main unit.
103