Table 8-4. Serviceable Components - Motorola APX 3000 Basic Service Manual

8-12
8.5.2.1 Servicing Label Gore Port:
1. Complete steps from
2. Carefully peel off the label.
3. Use the Black Stick to help remove any difficult sections of the label.
4. Clean the area once the label is removed to ensure it is free from adhesive and debris.
5. Peel the new label of its backer and place in the respective location.
6. Apply slight pressure to set the adhesive.
8.5.2.2 Servicing Seal, Vacuum Port:
1. Complete steps in
2. Carefully peel off the seal.
3. Use the Black Stick to help remove any difficult sections of the seal.
4. Clean the area once the seal is removed to ensure it is free of adhesive and debris.
5. Peel the new seal of its backer and place it in the respective location.
Disassembly/Reassembly Procedures: Serviceable Components of the Main Sub-Assemblies

Table 8-4. Serviceable Components

Item No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Section 8.4.
Label Gore Port should always be replaced when back kit
assembly is removed.
Section 8.4.
Description
Label Shroud
Screw, Shroud
Bluetooth Pairing Indication Label
Shroud
Lightpipe, LEDs
Assy, Flex, NFC
Chassis
Main Seal
Label, Chassis Left
Label, Chassis Right
Seal, Vacuum Port
Label, Gore Port
Label, FM Approved Logo (Bottom)
Label, Bottom Blank
Battery Seal Contact