Clock/Vu Meter Setup (Optional); General; Operation; Time Setting - Motorola ASTRO Spectra Instruction Manual

Installation: Clock/VU Meter Setup (Optional)
Clock/VU Meter
Setup (Optional)

General

Operation

Time Setting

12

Table 7. Tone Table Selection

SEL #4 SEL #3
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF ON
OFF ON
OFF ON
OFF ON
ON OFF
ON OFF
ON OFF
ON OFF
ON ON
ON ON
ON ON
ON ON
The clock shows the time, day, month, and year.
Press the mode button to change the display cyclically between the time,
month.day, and year.
After power up, the display flashes and the clock starts from the default time
of: 00:00:00, month.day: 1.1, year: 1990.
1. Press the mode button until the time is displayed (HH:MM).
2. Press the set button for 5 seconds.
3. Press the mode button to reset the seconds. The display shows the
seconds.
4. Press the set button. The display shows the hours and minutes (flashing).
5. Press the mode button until the correct minutes are displayed.
6. Press the set button. The display shows the hours (flashing) and minutes.
7. Press the mode button until the desired hour is displayed.
SEL #2 SEL #1
OFF OFF
OFF ON
ON OFF
ON ON
OFF OFF
OFF ON
ON OFF
ON ON
OFF OFF
OFF ON
ON OFF
ON ON
OFF OFF
OFF ON
ON OFF
ON ON
Selected Tone
Table
Standard
CentraCom II
No Mode Sel
Mode 1 only
No Mode 1
Not supported
Not supported
Not supported
Not supported
Not supported
Not supported
Not supported
Not supported
Not supported
Not supported
Not supported
6881086C22-B