Figure 8-14. Serviceable Components - Chassis Assembly - Motorola APX 3000 Basic Service Manual

Disassembly/Reassembly Procedures: Serviceable Components of the Main Sub-Assemblies
8.5.1.2 Servicing Thermal Pad:
1. Complete steps from
2. Carefully peel off the pad.
3. Ensure there is no debris or residue left on the amplifier's surface.
4. Replace with new Thermal Pad.
5. Peel the liner off the new pad and place in the respective location. Make sure the bottom
surface of the pad is mating with the top surface of the amplifier.
6. Apply slight pressure to activate the adhesive.
8.5.2 Servicing Chassis Assembly
3
1
2
NOTE: When servicing NFC Assy Flex, assemble the NFC Assy Flex first before assembling back
the poron.
Section 8.4.4.1.
Thermal pad should always be replaced when the Main board
assembly is removed.
5
4
6
14
11
12
Figure 8-14. Serviceable Components – Chassis Assembly
through Section 8.4.4.3.
7
13
10
8
9
8-11