Removing The Fans; Prerequisites; Procedure - Dell XPS 15 Service Manual

Identifier
Status

Removing the fans

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status

Prerequisites

1 Remove the base
2 Remove the battery (half-length)
Identifier
Status

Procedure

NOTE: The touch-screen cable is available only on laptop configurations
with touch displays.
1 Remove the two screws (M2x4) that secure the video fan (JFAN_2) to the
system board.
2 Disconnect the touch-screen cable from the system board.
3 Peel off the tape that secures the touch-screen cable to the video fan (JFAN_2).
4 Note the routing of the touch-screen cable and remove the cable from the
routing guides on the video fan (JFAN_2).
5 Disconnect the video fan (JFAN_2) cable from the system board.
48
GUID-F98150E9-52A3-4FCD-8420-54A9A2A6DA46
Released
computer. After working inside your computer, follow
After working inside your
GUID-28F89DF8-99BB-4B9C-88D1-6DB4494163CF
Released
cover.
or the
GUID-25D531B0-2984-47B0-AD3F-D83854B7F4AC
Released
computer. For more safety best
battery (full-length).
Before
www.dell.com/