Replacing the fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Align the screw holes on the fan with the screw holes on the palm-rest assembly.
2
Replace the screw (M1.6x3) that secures the fan to the palm-rest assembly.
3
Route the display cable through the routing guides on the fan.
4
Adhere the tape that secures the display cable to the fan.
Post-requisites
1
Replace the
system
2
Replace the
wireless
3
Replace the battery.
4
Replace the
base
computer. After working inside your computer, follow
After working inside your
board.
card.
cover.
computer. For more safety best
www.dell.com/
Before
81