Removing the speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
base
2
Remove the battery.
Procedure
1
Disconnect the speaker cable from the system board.
2
Remove the four screws (M2x2) that secure the speakers to the palm-rest
assembly.
3
Note the speaker-cable routing and peel off the tape that secures the speaker
cable to the system board.
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before
31