Removing the display assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
base
2
Remove the battery.
Procedure
1
Disconnect the touchscreen cable (optional) and camera cable from the system
board.
2
Peel off the tape that secures the antenna cables to the system board.
3
Remove the screw (M2x3) that secures the wireless-card bracket to the system
board.
4
Lift the wireless-card bracket off the wireless card.
54
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before