Removing The I/O Board; Prerequisites; Procedure - Dell XPS 13 Service Manual

Removing the I/O board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

1 Remove the base
2 Remove the battery.

Procedure

1 Remove the two screws (M1.6x3) that secure the I/O board to the palm-rest
assembly.
2 Peel off the tape that secures the display cable to the I/O board.
3 Disconnect the media-card reader cable from the I/O board.
4 Open the latch and disconnect the I/O-board cable from the I/O board.
50
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before