Io Board; Removing The I/O Board - Dell 24CFV Service Manual

Steps
1. Using the alignment posts and rubber grommets, place the speakers in the slots on the palm-rest and keyboard assembly.
2. Route the speaker cable through the routing guides on the palm-rest and keyboard assembly..
3. Connect the speaker cable to the connector on the system board .
Next steps
1. Install the base cover.
2. Exit service mode.
3. Install the SD card.
4. Follow the procedure in

IO board

Removing the I/O board

Prerequisites
1. Follow the procedure in
2. Remove the SD card.
3. Enter service mode.
4. Remove the base cover.
About this task
The following images indicate the location of the I/O board and provides a visual representation of the removal procedure.
after working inside your
before working inside your
computer.
computer.
Removing and installing components 45