Cleaning Tips - Stanley PW6768 Instruction Manual

CLEANING TIPS

Deck Cleaning
- with or without detergent
Pre-rinse deck and surrounding area with fresh water. If using
deck wash, place detergent suction tube directly into cleaning
solution and apply to surface at low pressure.
For best results, limit your work area to smaller sections of
approximately 2m , allow deck wash to remain on surface 1-3
2
minutes. For stubborn dirt/stains you can use a patio cleaner
head (not supplied).
Do not allow detergent to dry on surface.
Rinse at high pressure in a long sweeping motion keeping the
spray nozzle approximately 75mm to 150mm from the cleaning
surface. Always clean from top to bottom and from left to right.
When moving on to a new section of the cleaning surface, be
sure to overlap the previous section to eliminate stop marks and
ensure a more even cleaning result.
House Siding
- with or without detergent
Pre-rinse cleaning surface with fresh water. If using house
wash, place detergent suction tube directly into cleaning
solution and apply to surface at low pressure (for best results,
limit your work area to sections of approximately 2m wide and
always apply detergent from bottom to top ).
Allow house wash to remain on surface 1-3 minutes. Do not
allow detergent to dry on surface, if surface appears to be
drying, simply wet down surface with fresh water.
If needed, use special cyclone nozzle attachment (not supplied)
to remove stubborn dirt. Rinse at high pressure from top to
bottom in an even sweeping motion keeping the spray nozzle
approximately 150mm from the cleaning surface.
Cement Patios, Brick & Stone
- with or without detergent
Pre-rinse cleaning surface with fresh water,
If using all purpose cleaner, place detergent suction tube
directly into cleaning solution and apply to surface at low
pressure. For best results, limit your work area to smaller
sections of approximately 2m
remain on surface 1-3 minutes.
Do not allow detergent to dry on surface.
Rinse at high pressure in a sweeping motion keeping the spray
nozzle approximately 75mm to 150mm from the cleaning surface.
Always clean from top to bottom and from left to right. For
removing extremely stubborn stains, use dirt blaster nozzle.
Cars, Boats & Motorcycles
- with or without detergent
Pre-rinse vehicle with fresh water. If using vehicle wash, place
detergent suction tube directly into cleaning solution and apply
to surface at low pressure.
. Allow all purpose cleaner to
2
For best results, clean one side of vehicle at a time and always
apply detergent from bottom to top, do not allow detergent to
dry on surface. Rinse at high pressure in a sweeping motion
keeping the spray nozzle approximately 150mm to 200mm from
the cleaning surface (distance should increase with in rinsing
pin-striping or other sensitive surfaces).
Always clean from top to bottom and from left to right. For best
results, wipe surface dry with a chamois or soft dry cloth.
BBQ Grills, Outdoor Power
Equipment & Gardening Tools
- with or without detergent
Pre-rinse surface with fresh water. If using all purpose cleaner
or degreaser, place detergent suction tube directly into cleaning
solution and apply detergent at low pressure. Allow detergent
to remain on surface 1-3 minutes. Do not allow detergent to dry
on surface
Rinse at high pressure keeping the spray nozzle approximately
75mm to 150mm from the cleaning surface. For removing
extremely stubborn dirt, it may be necessary to move the spray
nozzle even closer to the surface for greater dirt cutting action.
To remove caked-on mud from garbage cans, lawn mower
blades, wheelbarrows or other non-sensitive metal surfaces,
you may want to use a smaller degree nozzle.
Patio & Lawn Furniture
- with or without detergent
Pre-rinse furniture and surrounding area with fresh water. If
using all purpose cleaner, place detergent suction tube directly
into cleaning solution and apply to surface at low pressure.
Allow all purpose leaner to remain on surface 1-3 minutes. Do
not allow detergent to dry on surface. Rinse at high pressure
in a sweeping motion keeping the spray nozzle approximately
75mm to 150mm from the cleaning surface. For best results,
clean from top to bottom and from left to right.
Recommendations
If painted surfaces are peeling or chipping, use extreme caution
as pressure washer may remove the loose paint from the
surface.
Always start with the largest degree nozzle to minimise any
paint damage.
18