Cleaning Tips - Stanley SXPW5551 Manual

CLEANING TIPS

Deck Cleaning - with or without detergent
Pre-rinse deck and surrounding area with fresh water.
If using deck wash, place detergent suction tube directly
into cleaning solution and apply to surface at low pressure.
For best results, limit your work area to smaller sections of
approximately 2m , allow deck wash to remain on surface
2
1-3 minutes. For stubborn dirt/stains you can use a patio
cleaner head (not supplied).
Do not allow detergent to dry on surface.
Rinse at high pressure in a long sweeping motion keeping
the spray nozzle approximately 75mm to 150mm from the
cleaning surface. Always clean from top to bottom and
from left to right.
When moving on to a new section of the cleaning surface,
be sure to overlap the previous section to eliminate stop
marks and ensure a more even cleaning result.
House Siding - with or without detergent
Pre-rinse cleaning surface with fresh water. If using house
wash, place detergent suction tube directly into cleaning
solution and apply to surface at low pressure (for best
results, limit your work area to sections of approximately
2m wide and always apply detergent from bottom to top).
Allow house wash to remain on surface 1-3 minutes.
Do not allow detergent to dry on surface, if surface
appears to be drying, simply wet down surface with
fresh water.
If needed, use special cyclone nozzle attachment (not
supplied) to remove stubborn dirt. Rinse at high pressure
from top to bottom in an even sweeping motion keeping
the spray nozzle approximately 150mm from the
cleaning surface.
Cement Patios, Brick & Stone - with or without
detergent
Pre-rinse cleaning surface with fresh water,
If using all purpose cleaner, place detergent suction tube
directly into cleaning solution and apply to surface at low
pressure. For best results, limit your work area to smaller
sections of approximately 2m². Allow all purpose cleaner to
remain on surface 1-3 minutes.
Do not allow detergent to dry on surface.
Rinse at high pressure in a sweeping motion keeping the
spray nozzle approximately 75mm to 150mm from the
cleaning surface. Always clean from top to bottom and
from left to right. For removing extremely stubborn stains,
use dirt blaster nozzle.
Cars, Boats & Motorcycles - with or without
detergent
Pre-rinse vehicle with fresh water. If using vehicle wash,
place detergent suction tube directly into cleaning solution
and apply to surface at low pressure.
For best results, clean one side of vehicle at a time and
always apply detergent from bottom to top, do not allow
detergent to dry on surface. Rinse at high pressure in a
sweeping motion keeping the spray nozzle approximately
150mm to 200mm from the cleaning surface (distance
should increase with in rinsing pin-striping or other
sensitive surfaces).
Always clean from top to bottom and from left to right.
For best results, wipe surface dry with a chamois or soft
dry cloth.
BBQ Grills, Outdoor Power Equipment & Gardening
Tools - with or without detergent
Pre-rinse surface with fresh water. If using all purpose
cleaner or degreaser, place detergent suction tube directly
into cleaning solution and apply detergent at low pressure.
Allow detergent to remain on surface 1-3 minutes. Do not
allow detergent to dry on surface
Rinse at high pressure keeping the spray nozzle
approximately 75mm to 150mm from the cleaning surface.
For removing extremely stubborn dirt, it may be necessary
to move the spray nozzle even closer to the surface for
greater dirt cutting action. To remove caked-on mud from
garbage cans, lawn mower blades, wheelbarrows or other
non-sensitive metal surfaces, you may want to use
a smaller degree nozzle.
Patio & Outdoor Furniture - with or without
detergent
Pre-rinse furniture and surrounding area with fresh water.
If using all purpose cleaner, place detergent suction tube
directly into cleaning solution and apply to surface at low
pressure. Allow all purpose cleaner to remain on surface
1-3 minutes. Do not allow detergent to dry on surface.
Rinse at high pressure in a sweeping motion keeping the
spray nozzle approximately 75mm to 150mm from the
cleaning surface. For best results, clean from top to bottom
and from left to right.
Recommendations
If painted surfaces are peeling or chipping, use extreme
caution as pressure washer may remove the loose paint
from the surface.
Always start with the largest degree nozzle to minimise
any paint damage.
17