Assembly Instructions - Stanley PW6768 Instruction Manual

UNPACKING & ASSEMBLY
Unpacking
Note: Carefully unpack your pressure washer. This pressure
washer is bulky and heavy, two (2) person lift required. Dispose of
all packing material in an environmentally responsible manner.
Open carton, gently lift the pressure washer clear of the carton and
packaging, this may require 2 people. Remove from plastic bag.
Note: Plastic bags can be a danger to young children, dispose of
immediately. Always dispose of packaging in a responsible manner.
Wheels
Pic. 2
1. Place wheel on axle.
2. Slide the axle into the tube under the frame. Depress the
brass button and push the axle into the tube.
3. Rotate the axle until the button "clicks" and locks
into the hole in the tube.
Handle
Pic. 3
1. Aligh top handle to the main frame.
2. Insert bolt and tighten nut.
Holders
Pic. 3
1. Aligh each holder(s) holes with those on handle.
2. Insert bolt and tighten nut.
Gun/Lance
Pic. 4
Push the lance into the gun and tighten nut. Slide cover over
the nut.
PIC. 2
Brass Button
Push Brass button in and ensure
that the Brass button locates into
the hole in the tube
PIC. 3
Hose Holder
PIC. 4
Gun
11
Top Handle
Trigger
Holder
Lance