Modbus Io Device - Digiever DS-2005 User Manual

5.7.2

Modbus IO Device

NVR supports Modbus Analog I/O-Digital I/O devices using Modbus protocol to make
surveillance deployment more flexible to satisfy diverse project requirements such as
factory and warehouse where users pay more attention on environment control.
Users can configure desired events (digital Input or analog input) and corresponding actions
(digital output or analog output) by connecting to external Modbus AI/O box.
Note: one NVR can connect up to 4 Modbus Analog I/O-Digital I/O devices in default.
To connect NVR to more Modbus Analog I/O-Digital I/O devices, please contact sales.
Note: NVR supports Advantech 's Modbus Analog I/O-Digital I/O device for now:
ADAM-6024
1. Modbus IO Device
To add I/O device to NVR, please fill in Device Name, IP address, Device Port, Port,
Username and Password. And, click "Apply" button to add new advice.
Note: If the access device has no username/password, please freely enter any words
in Username and Password.
2. Device Parameter
Please choose a device in Device List to set up its parameter.
302