System Upgrade On Local Display - Digiever DS-2005 User Manual

3.5.2 System Upgrade on Local Display

NVR supports system upgrade in local display. For more information, please refer to
Chapter 5 - 5.7.2 Log System
If the hard disk is not installed, the following window will pop up when you click "Log
System."
After the hard disk is ready, Log system starts to record the events of the NVR and to
provide basic information for troubleshooting. Six types of log record are offered to
check: Hardware Log, System Log, Event Log, Current User, Historical User Log, and
File Access Log.
Note: The maximum record of each log is 10,000 records. In other words, NVR
offers six types of log record and the sum of all logs is 60,000 records. If a log
reaches to 10,000 records, the oldest log will be overwritten by the latest log.
1. Hardware Log
The log information in Hardware Log includes RAID creation, RAID deletion, RAID
modification, CPU, buzzer, fan, system, sensor and USB.
2. System Log
The log information in NVR Log includes time zone, daylight, system, firmware
upgrading, configuration IP, recording files export and storage.
148