Table of Contents
Related Manuals for Digiever DS-8300-SRM Pro+ Series
Summary of Contents for Digiever DS-8300-SRM Pro+ Series
- Page 1 Network Video Recorder Quick Installation Guide DS-8300-SRM Pro+ Series DS-8342/8349/8356/8364-SRM Pro+ Quality Service Group 1.0.0.10 Information in this document is subject to change without notice. © Copyright 2017, DIGIEVER Corporation. All rights reserved.
- Page 2 NVR. Please read the following description carefully. Pre- Notice installation Please make sure the following items are prepared for installing DIGIEVER NVR DS-8300-SRM Pro+ Series. Network connection ...
- Page 3 Graphics Adapter AGP or PCI-Express, minimum 1024×768, 16 bit colors, 1G memory or above Note: It is highly recommended to use a graphics adaptor which provides higher than resolutions 1024 x 768 in order to experience the full benefits of the software. ...
-
Page 4: Package Contents
Package Contents NVR Network Video Recorder Power Cord Ethernet Cable Screw Bag Product CD... -
Page 5: Hardware Description
Hardware Description Front View Rear View LED indicators: LAN1, LAN2, eSATA, HDD1, HDD2, HDD3, HDD4, HDD5, HDD6, HDD7, HDD8 Power button USB BACKUP button - Auto video backup USB 3.0 x 1 (Support auto video backup) HDD1 HDD2 HDD3 HDD4 HDD5 10. -
Page 6: Hard Disk Installation
Hard Disk Installation Please follow the steps as illustrated below to install the hardware: Take out the disk tray from NVR. Connect the Ethernet cable to the port of Giga LAN. Install the hard disk in each tray ... - Page 7 Connection to DIGIEVER NVR Please insert the product CD-ROM on a PC to install EZ Search and S-NVR Decoder. Finally, you can start Quick Configuration on a web page. Install EZ Search for finding NVR in the network.
- Page 8 IP address or change it in this page. However, it’s recommended setting different IP address of DIGIEVER NVR if there is more than one DIGIEVER NVR in the same LAN.
- Page 9 2. Enter a user name and password Log in the NVR with the default administer account (user name: admin, password: admin). 3. Download and install NVR-Client.exe, a software application, to execute liveview monitoring and video playback.
-
Page 10: Quick Configuration
Once the five steps of Quick Configuration are complete, you can click “Start Liveview” to start monitoring. For further details of Quick Configuration, please refer to the user manual. When the live view is displayed, you have successfully installed the DIGIEVER NVR. Congratulations!
Need help?
Do you have a question about the DS-8300-SRM Pro+ Series and is the answer not in the manual?
Questions and answers