Server Settings - Digiever DS-2005 User Manual

To assign a static IP address to the NVR:
1. Select "Specify an IP address"
2. Enter the IP address, Subnet Mask, Default Gateway IP Address and DNS server
address.
3. If IP Address is changed, user needs to log out NVR and login in again.
Click "Next" to proceed with the configuration.

2.3.3 Server Settings

Please select "Server Settings" from the drop-down menu of Configuration Utility to
begin.
(3) Server name with UPnP
Universal Plug and Play (UPnP) simplifies the process of adding a NVR to a local area
network. Once connected to LAN, the NVR will automatically appear on the internet.
User can select to enable the function with UPnP and edit a sever name.
(4) Password Settings
Each NVR comes with a built-in "admin" account with password "admin." It's highly
recommended to change the password upon the initial login. Enter a new password
in the "New Password" field and enter it again in "Retype Password." Since you
confirm "Next," the administrator password will be changed.
99