Log In Nvr - Digiever DS-2005 User Manual
Ds-2000 series;
ds-4000 series;
ds-1100 pro+ series;
ds-2100 pro+ series;
ds-4200 pro+ series;
ds-4200-rm pro+ series;
ds-4200-rmp pro+ series;
ds-8200-rm pro+ series;
ds-8200-rmp pro+ series;
ds-8200-srm pro+ series;
ds-8200-srmp pro+ series;
Hide thumbs
Also See for DS-2005:
- User manual (184 pages) ,
- Quick installation manual (9 pages) ,
- User manual (243 pages)
Table of Contents
Advertisement
NVR can be connected to a monitor via HDMI/VGA/DVI-I port to execute quick
configuration and display live view.
Note: Local display feature is supported in Pro and Pro+ series.
To start local display, please check the steps below:
1. Please install at least one hard disk drive in your NVR.
2. Connect NVR and IP cameras to the network.
3. Make sure the monitor is connected to the port (HDMI /VGA/ DVI-I) of NVR rear
panel.
4. Please connect a USB mouse to the USB port of NVR.
5. Please connect power cord and connector to turn on NVR.
6. When you enter the log in interface of NVR, please enter default user name "admin"
and password "admin" and select languages.
3.1 Log in NVR
You have to key in the correct username and password to login NVR.
Resolution:
User can select the resolution 1920x1080 or 1024x768 in login page, when the
monitor supports both types of resolution.
120
- Quick Links:
- User Manual
Hide quick links:
Advertisement
Table of Contents
