Usb Backup - Digiever DS-2005 User Manual

5.4.2

USB Backup

NVR can back up the latest video files by inserting USB device or USB type DVD burner into
the USB port in the NVR (front panel backup area) by pressing "USB BACKUP" for 3 seconds.
In addition to set up backup setting in NVR local site, users can remotely preset the latest
duration and channels of USB Backup button for local security guard to execute quick USB
backup.
During the backup process, USB LED indicator will blink in blue light. When the NVR
finished duplicating the data to the USB device, the blue light will fade away.
Note: If any error occurs, including USB Backup function not enabled, USB LED
indicator will show red to warn.
Note: USB device format should be FAT32 file system.
1. USB Backup
To enable the USB Backup button function and to setup the USB Backup button's channels
and the latest time duration for future duplication, please select "USB Backup" from the
drop-down menu of Backup.
USB Backup Setting
(1) Enabled: USB Backup function can be enabled or disabled, for security concern.
(2) Latest recordings Information: Set up days, hours and minutes to back up the latest
video files.
(3) Channel Selection: Select certain camera channels or click "All" channels for future
backup.
(4) Apply: Click "Apply" to save configuration.
262