Table of Contents
Advertisement
Evolution
5. When alerts are On, and multiple alerts are detected, the Evolution will
only display one. For example: if you exceed the set point for both
MPH and RPM, the first alert the Evolution detects will be the one
displayed. Pressing any button will temporarily disable the alert until
the vehicle falls below the set point and then will automatically re-
enable.
Records
The Evolution automatically records the highest value of some of the
parameters. To view these records and to reset them, do the following:
1. From the Main Menu select the Setup option. The Setup screen appears
as follows:
2. Select the Records option. The following screen appears:
3. This is where you can view all of the current recorded high values. The
arrow located at the bottom right corner of the screen indicates there
are more parameters than the display can show. Use the [UP] and
[DOWN] arrow keys to scroll through the list of records. If you would
like to reset a single parameter, select the desired parameter and press
[ENTER]. If you would like to reset all of the records, select the Clear
All option and press [ENTER]. To exit out of this list press [MENU].
33
FORD 4.6 and 5.4 Liter
Hide quick links:
Advertisement
Table of Contents
