Edge Evolution 15051 Installation Instructions & Manual For Maintenance page 28

Evolution
3. Select the style which you would like the parameters to be displayed
on your screen and press [ENTER]. Depending on which display you
select, a screen similar to the following appears:
4. This screen lists the current parameters being displayed and their
respective positions on the screen (i.e., TOP LEFT, etc.). Select the
position you would like to change and press [ENTER]. A list of
available parameters will be displayed. Select the parameter you would
like to view and press [ENTER]. (A list of commonly used acronyms
is located in the back of this manual and a in depth list of the PIDs
supported follows). Once you have selected your desired parameters,
select the Set as Display option and press [ENTER]. You will return to
the Setup menu with your new settings saved.
NOTE: If you choose to display Average Miles Per Gallon (AMPG), you may need to
reset it from time to time. To do so, from the main screen, press the enter button twice in
rapid succession, this will reset the AMPG and it will start over.
Below is a list of the 22 PIDs you can display and description of each:
 RPM (revolutions per minute) –
 MPH (miles per hour) – Note: Dash display may be +/-3 MPH off
from the digital display due to mechanical differences in the spring,
etc. used to control the gauge.
Displays current engine speed in RPM
27
FORD 4.6 and 5.4 Liter