Table of Contents
Advertisement
Removing the audio board
Prior to performing the following procedure, remove
the top cover and the tuner board, audio input board,
video audio board, video board, S-video board, DVD
board and the rear panel.
1.
Disconnect the harness from connector CN813 and
CN814 on the main board.
2.
Disconnect the card wire from connector CN931 and
CN932 on the audio board.
3.
Cut off the tie band fixing the harness.
Disconnect the relay board from the audio board and
4.
the power supply board. (CN71,CN81)
Disconnect the card wire from connector CN831 on
5.
the main board.
Remove the three screws G attaching the audio
6.
board.
Remove the screw H attaching the audio board .
7.
(See Fig.12 to 13)
Video audio
board
Fig.10
Fig.11
CN814 CN813
Main
board
Audio board
CN931/ 932
CN81
Fig.12
CN831
G
G
Fig.13
RX-8012VSL/RX-8010VBK
S Video
board
Video
board
DSP board
CN601
Relay board
CN71
Power
supply
board
Tie band
Power
transformer
Voltage
select
board
Power / Fuse
board
H
1-5
- Quick Links:
- Connecting the Speakers
Hide quick links:
Advertisement
Table of Contents
