Feature Upgrades; Figure 9-1: Feature Update Via Configuration Tool - Focal 914-HDE User Manual

Feature Upgrades

If a feature upgrade has been purchased, these are the installation instructions. Feature upgrades allow 914-
HDE L1 cards to be upgraded to M1 version, as an example. Contact Focal for upgrade options for your cards.
1. Obtain Feature upgrade codes from Focal, there are 2 codes: Unlock Code and Feature Code. Both
codes are 16 digit hexadecimal alpha numeric numbers
2. Open the 914-HDE diagnostic GUI with the Console 914-HDE connected to a local COM port as per
manual section 3.
3. Use the "Tools" slide over menu on the left side, and select the "Configuration Tool".
4. Enter both the Unlock and Feature Code, and select the destination card (remote or console), then
press "Apply"
5. Both remote and console cards can be upgraded from the console side, there is no need to directly
access the remote card, but it must be powered and linked optically to receive the upgrade.
Focal Technologies Corporation
A Moog Inc. Company

Figure 9-1: Feature Update Via Configuration Tool

Model 914-HDE User Manual
Document Number: 914-0601-00 Rev. 4.0
9-1