Figure 4-4: 914-Hde Card Info - Focal 914-HDE User Manual

Model 914-HDE User Manual
Once the COM port is setup, press "Start Data Refresh" at the bottom of the screen.
If a successful link to the 914-HDE is established, a green heart will be seen at the top left of the screen near
the COM port listing. If the heart appears red, the link has not been established. Verify the COM port number
and the wiring harness to the PCBA and ensure power is applied to the 914-HDE.
When the link is established, click on the "Model 914 – Console" and "Model 914 Remote" text to pull up a list
of card features, including the card info as displayed in Figure 4-4.

Figure 4-4: 914-HDE Card Info

Focal Technologies Corporation 4-3
A Moog Inc. Company
Document Number: 914-0601-00 Rev. 4.0