914-Vdx Diagnostic Leds; Table 13: 914-Hde Diagnostic Leds; Figure 5-7: Vdx Diagnostic Leds - Focal 914-HDE User Manual

5.1.4 914-VDX Diagnostic LEDs

The 914-VDX card includes 15 on-board diagnostic LEDs. A description and location of each LED is provided
in Table 6 and Figure 3-9.
Reference Color
Designator
D1
Green
D2 Yellow
D3
Green
D4 Yellow
D7
Red
D8 Green
D9 Green
D10 Green
D11
Green
D12 Green
D13 Red
D14 Green
D15 Yellow
D16 Green
D17 Yellow
Focal Technologies Corporation
A Moog Inc. Company

Table 13: 914-HDE Diagnostic LEDs

Flashing LED indicates serial channel 3 is transmitting to external equipment.
Flashing LED indicates serial channel 3 is receiving from external equipment.
Flashing LED indicates serial channel 4 is transmitting to external equipment.
Flashing LED indicates serial channel 4 is receiving from external equipment.
Indicates a power fault when lit. A power fault is encountered when the input voltage
falls outside of the supported range of 4.5 to 13.5 V. Recommended input voltage is
5 VDC. When this LED is lit, the card is not powered properly and will not function.
Indicates that the card is powered properly when lit.
Indicates the 914-VDX is configured for Console mode.
Indicates a valid video signal is present on channel 1 when lit
Indicates a valid video signal is present on channel 2 when lit
Indicates a valid expansion link is being received. (data frames are present)
Indicates the expansion link is in fault condition. (little or no valid data is present)
Flashing LED indicates serial channel 1 is transmitting to external equipment.
Flashing LED indicates serial channel 1 is receiving from external equipment.
Flashing LED indicates serial channel 2 is transmitting to external equipment.
Flashing LED indicates serial channel 2 is receiving from external equipment.

Figure 5-7: VDX Diagnostic LEDs

Model 914-HDE User Manual
Description
Document Number: 914-0601-00 Rev. 4.0
5-3