914-Hde Product Handling; Accessories - Focal 914-HDE User Manual

7.5 914-HDE Product Handling

General Handling
Care must always be taken during the handling of the 914-HDE to ensure product integrity. The following
guidelines should be observed while working with the card:

Handle products at an ESD safe workstation with a clean surface.

Ensure fibers are not crimped or moved away from their intended routes.

Ensure any disconnected optical connectors are cleaned immediately prior to reconnection.

Do not exceed the recommended minimum fiber bend radius, even momentarily.

Mishandling may cause damage to the optical transceiver, video or serial connectors, or internal
components. The multiplexers must always be handled appropriately during installation, operation,
maintenance, storage, and transportation to ensure safe and problem free operation.

Any visible damage or evidence of loose parts requires removal of the modem from operation and
investigation by qualified service personnel.

7.6 Accessories

914 accessory kits are available from Focal, these include standoffs and spacers for mechanical integration of
motherboards with expansion cards, as well as mating cables for all interfaces. Please contact your local Focal
Technologies representative for more information including orderable part numbers.
Focal Technologies Corporation
A Moog Inc. Company
Model 914-HDE User Manual
Document Number: 914-0601-00 Rev. 4.0
7-4