Power; Table 2: Power Connector Pinout; Figure 3-3: Power Input Connector Location - Focal 914-HDE User Manual

3.2 Power

Power to the 914-HDE card is provided through connector J3, Molex P/N 09-75-2024. The mating plug is Molex
P/N 26-03-4020 with crimps P/N 08-52-0113. The pinout is provided in the table and figure below.
Table 2: Power
Connector Pinout
Pin # Function
1 GND
2 VCC
The recommended input voltage range is 4.5 VDC to 13.0 VDC (typically +5 VDC regulated). Nominal power
consumption is 5 W, increasing to 5.5 W at 60
The onboard surface mount fuse, F1, is rated to 2A and is not intended to be field replaceable. If the power
fuse is blown, the card should be evaluated for damage by the factory or trained service personnel prior to
any repair.
Focal Technologies Corporation
A Moog Inc. Company

Figure 3-3: Power Input Connector Location

C ambient temperature. Power leads should be AWG 18 – 20.
o
Model 914-HDE User Manual
Document Number: 914-0601-00 Rev. 4.0
3-5