Winegard WV750 Product Manual page 25

The "GO" button will change to a "STOP" button and the "NEXT" button will
become grayed out. The Controller will tell the ODU to move the antenna
motors in all axis sequentially, first elevation, then azimuth before stowing
the antenna.
iii.
Once both motors have been processed thru the calibration, the
"NEXT" button will become available again.
If this happens then the system completed a successful calibration. Tapping
the "NEXT" button will move the configuration to the next step on item 7.
7. HEADING screen -
After the CALIBRATION screen the system continues to the HEADING screen.
a) The WV750 Antenna System's Heading Mode should be in Compass mode. This
is the factory default setting.
At this time select "NEXT" to go to step 8.
7451041 - V2.2
25