Winegard WV750 Product Manual page 21

6.4.1 - Configuring the Controller
Configuring the Winegard Controller is a rather simple process which is based on two
sections of configuration that run concurrently.
The first section consists of question screens asking if the user wants to move the
antenna or perform calibrations and the second section is primarily centered on the
modem and service parameters for the search.
How to Configure the Controller
1. Tap the Authorized Installer Menu Icon in the Main Menu.
2. The controller will enter the Installation menu section. The INSTALLATION MENU
screen asks if you want to select "AUTHORIZED INSTALLER" for configuration
purposes or "MAIN MENU" to back out of the Installation menu.
Tap the "AUTHORIZED INSTALLER" button.
3. ENTER PASSCODE screen -
The next screen that appears is a numerical pad requesting input of the Passcode.
The Passcode is set from the factory to a default of "1234".
If an incorrect value is entered, the DEL button will allow you to backspace one
character per tap.
7451041 - V2.2
21