Safety Instructions; Symbol Meaning; Safety Alert Symbol; General Power Tool Safety Warnings - EGO HT6500E Operator's Manual

READ ALL INSTRUCTIONS!
READ & UNDERSTAND
INSTRUCTION MANUAL
Residual risk!
People with electronic devices, such
as pacemakers, should consult their physician(s) before
using this product. Operation of electrical equipment
in close proximity to a heart pacemaker could cause
interference or failure of the pacemaker.
WARNING:
To ensure safety and reliability, all
repairs and replacements should be performed by a
qualified service technician.
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention
to possible dangers. The safety symbols and the expla-
nations with them deserve your careful attention and un-
derstanding. The symbol warnings do not, by themselves,
eliminate any danger.
The instructions and warnings they give are no substitutes
for proper accident prevention measures.
WARNING:
Be sure to read and understand all
safety instructions in this Operator's Manual, including all
safety alert symbols such as "DANGER," "WARNING,"
and "CAUTION" before using this tool. Failure to follow all
instructions listed below may result in electric shock, fire,
and/or serious personal injury.

SYMBOL MEANING

SAFETY ALERT SYMBOL:

WARNING, or CAUTION. May be used in conjunction with
other symbols or pictographs.
WARNING:
The operation of any power tools can
result in foreign objects being thrown into your eyes, which
can result in severe eye damage. Before beginning power
tool operation, always wear safety goggles or safety glasses
with side shields and a full face shield when needed. We
recommend a Wide Vision Safety Mask for use over eye-
glasses or standard safety glasses with side shields.
4
56 VOLT LITHIUM-ION CORDLESS HEDGE TRIMMER — HT6500E
Indicates DANGER,

SAFETY INSTRUCTIONS

This page depicts and describes safety symbols that may
appear on this product. Read, understand, and follow
all instructions on the machine before attempting to
assemble and operate.
Safety Alert
Read The
Operator's
Manual
Blade Length
65cm
Cutting
Ø33 mm
Capacity
72
Noise
NOISE dB
Ingress Protec-
IPX4
tion Degree
V Volt
A Amperes
Hz Hertz
W Watt
min Minutes
Alternating
Current
Direct Current
n No Load Speed Rotational speed, at no load
0
... /min Per Minute
Strokes Per
SPM
Minute

GENERAL POWER TOOL SAFETY WARNINGS

WARNING:
Read all safety warnings and
instructions. Fail to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Indicates a potential personal
injury hazard.
To reduce the risk of injury,
user must read operator's
manual.
The length of the blade
Max. Cutting capacity of the
blade
Guaranteed sound power
level.
Protection from splashing
water
Voltage
Current
Frequency (cycles per second)
Power
Time
Type of current
Type or a characteristic of
current
Revolutions per minute
Stroke speed, at no load