Indication Of Dvd Self-Check; Indication Of Hdd Self-Check; Available Button In Self-Check Mode; Initialize Mode Screen - Toshiba RD-XV47KE Service Manual

Table 2: Indication of DVD self-check (*7)
INDICATION
OK
NOT FOUND
CABLE ERROR
Table 3: Indication of HDD self-check (*8)
INDICATION
OK
NOT FOUND
CABLE ERROR
Table 4: Available button in self-check mode
BUTTON
ENTER (*9)
ON / STANDBY (*10)
OTHER
5. When the self-check mode is complete, press [
When initializing the HDD & DVD/VCR, press [ENTER] button. Fig. c appears on the screen. After two
seconds, the power is turned off automatically.
Table 5: Description of *11 in Fig. c
INDICATION
ENTER
WRITING
OK
NG
NOTE: When initializing, "Current Clock", "Setup Changing Item", "Channel Setup", "Area Setup", "Program" and
"HDD Contents" are initialized.
Connection of DVD is normal.
DVD drive cannot be found.
FFC cable (connecting to CN401) between the DVD drive and the DVD/HDD MAIN BOARD
is not connected correctly.
Connection of HDD is normal.
HDD drive cannot be found.
FFC cable between the BOARD ATA and the HDD drive is not connected correctly.
Initialize (only when the self-check mode is complete)
Turn the power off (when the self-check mode is complete)
Not available
" ******* " differs depending on the models.
SELF CHECK
DVD CONNECT STATUS :
HDD CONNECT STATUS :
HDD POWER ON HOURS :
BE Ver. :
FE Ver. :
Sub Micon Ver. :
HDD FORMAT :
Fig. c: Initialize Mode Screen
Initialization preparation is complete.
Initializing
Initializing is finished normally.
Initializing is not finished normally.
DESCRIPTION
DESCRIPTION
DESCRIPTION
] button to turn the power off.
OK
OK
100(40)
T3*****B2S-****
R35_028_000
T3***TTP
WRITING *11
DESCRIPTION
1-9-2 E3B90INT