Setting The Screen; Tv Screen; Still Mode; Line1 Input/Line2 Input - Toshiba D-VR6KC Owner's Manual

Various settings

Setting the screen

This section describes settings about the screen.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select "AV SETUP 1" from "AV SETUP". For the pro-
cedure, see steps 1 to 3 in "Using the SETUP MENU"
on page 24.
SETUP MENU
TIMER REC SET
SYSTEM SETUP

TV SCREEN

AV SETUP

STILL MODE

LINE1 INPUT
REC SETUP
LINE2 INPUT
CH SETUP
OTHER
SELECT
ENTER ENTER RETURN
TV SCREEN
You can select the TV screen size to suit the screen
image.
Select "TV SCREEN" and select screen size from the
below.
4:3 Pan scan
It displays a wide picture across the whole screen
with left and right edges automatically cut off.
4:3 Letter box
Select this mode when connecting to a conventional
TV. When playing back a wide screen DVD disc, it
displays a wide picture with black bands at the top
and bottom of screen.
16:9
Select this mode when connecting to a wide-screen
TV. A wide-screen picture is displayed in full size.
NOTE:
If the DVD disc is not formatted in the pan scan format,
it displays a 4:3 aspect ratio.
STILL MODE
You can set the type of image displayed on the TV
screen when the playback of the DVD is stilled.
Select "STILL MODE" and select the image to be dis-
played from the below.
AUTOMATIC
The field still or frame still is automatically selected.
(For normal use.)
STILL BY FRAME
The frame still is set.
30
2J41101B_E P23-33
AV SETUP 1
4:3 Letter box
AUTOMATIC
VIDEO
VIDEO
BACK SETUP END
30
Note for the field still and frame still:
(with 480i interlaced scanning mode)
• Field* still (240 lines)
Since only one field (half of the video information) is
shown on the TV screen, the picture appears rough
but does not shake.
• Frame* still (480 lines)
Two fields are alternatively shown on the TV screen.
The picture shakes but the resulting picture quality is
superior to the field still pictures.
Field*: A field refers to the video information in one-
half of a frame. 1 frame (screen) consists of 2
fields.
Frame*: A frame refers to the total area occupied by
each picture on the TV screen.

LINE1 INPUT/LINE2 INPUT

This unit comes with an S-Video input jack and Video
input jack. When you use an S-Video or Video input
jack, you must select the input mode.
Select "LINE1 INPUT" ("LINE2 INPUT") and select the
mode from the below.
S-VIDEO
The video signal is inputted to the S-Video input jack
as priority.
VIDEO
The video signal is inputted only to the video input
jack.
5/28/07, 12:04 PM