Panasonic CS-NZ9SKE Service Manual page 70

14.11.3 Judge Sunlight Intensity

Based on sunlight sensor output voltage, the sunlight intensity value will be computed and logged to sunlight
intensity database.

The sunlight sensor sensitivity could be adjusted:
SET
TEMP
Remote control normal mode
Press & release
Press to choose No.2
Default: (Battery insert)
Set to Level. 3
Other than default
Display last set data
Set to Level. 4
Set to Level. 5
Set to Level. 1
Set to Level. 2
Sensitivity Level 1: Less sensitive to sunlight intensity
Sensitivity Level 3: Default sensitive level
Sensitivity Level 5: More sensitive to sunlight intensity
Press Transmit
Timer solar radiation
level
SET
&
after *30 secs
go back to
normal mode
70